| |
 |
EPM.PS Filter Cartridges (Liquid Filtration)
Description
EPМ.PS (ЭПМ.ПС)
cartridge membrane elements based on polyethersulfone having an absolute
filtration rating intended for use in various industries.
Filter
material
EPМ.PS
filter element incorporates a pleated hydrophilic polyethersulfone membrane
having an asymmetric pore structure which makes it possible to achieve high
flow rates at minimum differential pressure in combination with high
thermochemical stability (up to 100°C for water) as well as low sorption capacity
with respect to proteins, albumens and ferments.
Pore
size: 0.20, 0.45 and 0.65 μm. Material of Constructions
|
Membrane
|
Polyethersulfone |
|
Support, Drainage
and End Caps
|
Polypropylene
|
|
Core and Cage
|
Polypropylene
|
|
O-rings
|
Silicone*
|
*optionally Viton or fluorine rubber Main
applications
Healthcare
and BioPharmaceutical Industry:
-
Fine and sterilizing
filtration of parenteral preparations (LVP) having low or high pH levels
-
Fine and sterilizing
filtration of highly viscous media, including ophthalmological solutions
-
Filtration of blood
preparations, serums, protein-containing injection preparations
-
Clarification and
sterilization of large-volume aqueous, pharmaceutical and biological solutions
containing large amounts of colloid particles
-
Concentration of
protein-containing solutions
-
Filtration of buffer media
-
Production of galena
-
Filtration of process
water (washing machines, filtration at points of use, apyrogenic water, highly
purified laboratory water, return water)
Beverage
industry:
-
Defertilizing filtration
of wines in the cold filling operation mode
-
Cold sterilization of beer
-
Final filtration
(afterfiltration) of wines in the hot filling operation mode
-
Polishing of vodkas,
cognacs, coloured alcoholic beverages in the course of preparation for filling
-
Final filtration of
mineral waters, low alcohol and soft drinks
Other
industries:
-
fine filtration of liquid
media to remove particles 0.2 μm or more in size.
Main
size pore combinations of EPМ.PS
elements
|
One-layer filters
|
Two-layer filters
|
|
Pore size, μm
|
Order code
|
Pore size, μm
|
Order code
|
|
0.20
|
020
|
0.45+0.20
|
045/020
|
|
0.45
|
045
|
0.65+0.45
|
065/045
|
|
0.65
|
065
|
|
|
Technical
and operating characteristics
|
Element
designation
|
EPМ.PS
membrane cartridge element
|
|
Material
of the membrane
|
Polyethersulfone
|
|
Pore
size, μm
|
0.20
|
0.45
|
0.65
|
|
Minimum
air bubble point using water, MPa
|
0.33
|
0.25
|
0.16
|
|
Maximum
operating pressure, MPa
|
0.5
|
|
Maximum
differential pressure, MPa
|
0.5
at 20°C; 0.25 at 80°C
|
|
Maximum
counterpressure, MPa
|
0.20
at 20°C; 0.10 at 60°C
|
|
Maximum
operating temperature, °C
|
90
|
|
Effective
filter area, m2
|
0.75/0.65
|
|
pH
range
|
1
to 14
|
|
Number
of sterilization cycles at t=134°C / P=0.11 MPa within 30 to 45 min, no less than
|
30
|
Flow
rate as a function of pressure for EPМ.PS elements using distilled water (GOST 6709) 
Capacity
for retention of bacteria
Sterilizing
capacity of EPМ.PS-020 has been confirmed with respect to test microorganism Brevundimonas
Diminuta, stain PCI 818 (Pseudomonas Diminuta ATCC 19146, DSM 1635). The
level of microbiological load on the filter element complies with requirements
of the guideline of Association of producers of medical industry on
microbiological examination of filters for sterilization of liquids. EPМ.PS
has been checked for retention of bacteria after 10 cycles of autoclaving at
121°C in the Pharmacopoeia mode.
Ordering Information
|
EPМ.PS |
045/020 |
D1 |
250 |
М |
|
Grade
|
Removal Rating
|
Adapter types |
Nominal Length
|
Application
|
| |
|
|
|
|
| |
0.2 μm 0.45 μm 0.65 μm
|
A - Dead-end
cartridge, 44.5
mm adapter, disc
end cap,code: 27*, 3**, 0*** А1 - Dead-end cartridge, 44.5 mm adapter, fin
end
code:
26*(provisionally), 5***
А4 - Dead-end
cartridge, long 44.5 mm adapter, triple bayonet base at the bottom, fin end at the top, code: 28*
D1 - Dead-end cartridge, 56 mm adapter double bayonet base at
the bottom, fin end at the top, code:
25*,
7**, 7***
D - Dead-end
cartridge, 56 mm adapter, double bayonet base at
the bottom, disc end cap at the top В - In-line
cartridge, no adapter, code: 21*
В (SL) - In-line
cartridge, no
adapter, O-rings for Slime line
filter holders
|
100 = 100 mm
150 = 150 mm
250 = 250 mm (10 in.)
500 = 500 mm (20 in.)
750 = 750 mm (30 in.)
1000 = 1000 mm(40 in.) |
М = medical and biopharmaceutical.
P =
Food
industry |
*
Sartorius cartridge code; **
Pall cartridge code; *** Millipore cartridge
code
|
|
English
